Data series · Chapter 10

Scenario 2 — Heating with PT1 behaviour

Step to 150 kW heating power, time constant 12 s. Reaches 63.3 % at t = τ and 95.1 % at 3τ; mean deviation from the analytical solution 0.040 %.

Scenario
2 Heating
Expectation (criterion)
heating rate 0.0814 K/s; PT1 63.2 % at τ, 95.0 % at 3τ
Measurement
63.3 % at τ, 95.1 % at 3τ; mean deviation 0.040 % of maximum power
Result
passed
Rows
6,000
Time range
0.05–300.00 s
Time step
Δt = 0.05 s
Columns
9

Time series

Each quantity has its own axis and unit in its own panel; all share the time axis. The sensor bits appear as step lines. Clicking the legend shows or hides a quantity.

Time series of the measurement

Building the chart …

Quantities (click to show or hide)

    Controls: ← → move cursor (with ⇧ ten times) · Pos1 Ende to the edge · + − zoom · Bild↑ Bild↓ pan · 0 full series · Esc remove cursor. Drag a region with the mouse to zoom in. Values at the cursor belong to the nearest plotted data point; when zoomed far out the chart shows the minimum and maximum per pixel bucket so that single peaks stay visible. Exact values: zoom in or use the tables.

    Column description

    Name and unit come from the header row of the CSV file; the meaning follows the heated-tank model (chapter 8) and the recording (chapter 10).

    Columns of the series — Scenario 2 — Heating with PT1 behaviour
    No.Column (CSV header) UnitTypeMeaning
    1 Zeit (s) s Time axis Time stamp of the row (model time); one row per calculation step of Δt = 0.05 s.
    2 Füllstand (l) l Process variable Water level in the tank (tank volume 0.5 m³ = 500 l).
    3 Temperatur (°C) °C Process variable Water temperature, calculated from energy and water mass.
    4 Druck (bar) bar Process variable Pressure in the head space (steam and air, partial pressures added).
    5 Heizleistung (W) W Process variable Currently effective heating power (PT1 lag, τ = 12 s, up to 150 kW).
    6 B1 Füllstand max — Sensor bit (0/1) Upper level sensor: 1 from 450 l, otherwise 0.
    7 B2 Füllstand min — Sensor bit (0/1) Lower level sensor: 1 at 50 l or less, otherwise 0.
    8 B3 Temperatur ≥95 °C — Sensor bit (0/1) Temperature sensor: 1 from 95 °C, otherwise 0.
    9 B4 Druck ≥2,8 bar — Sensor bit (0/1) Pressure sensor: 1 from 2.8 bar, otherwise 0.

    Statistics of the series

    All figures are computed from the rows of the CSV file (over the whole series, without smoothing) and describe this single run only. They make no statement about a real tank.

    6,000Rows (calculation steps)
    300.00stime covered
    0.05sTime step Δt
    8recorded quantities
    Statistics per process variable — Scenario 2 — Heating with PT1 behaviour
    QuantityUnit CountMinimum MaximumMean First valueLast value
    Füllstand l 6,000 450.05constant 450.05 450.050 450.05 450.05
    Temperatur °C 6,000 16.131t = 0.05 s 39.568t = 300.00 s 27.4043 16.131 39.568
    Druck bar 6,000 0.0000t = 0.30 s 0.0072t = 0.05 s 0.0000 0.0072 0.0000
    Heizleistung W 6,000 625.0t = 0.05 s 150,000.0t = 178.60 s 144,025.00 625.0 150,000.0

    Below each extreme value is the time of the first row with that value. The mean is the simple mean over all rows (equal time steps).

    Sensor bits: switching times — Scenario 2 — Heating with PT1 behaviour
    Sensor bit Rows with 1 Share first 1 at then 0 again at Changes
    B1 Füllstand max 6,000 100.000 % 0.05 sfirst row — 0
    B2 Füllstand min 0 0.000 % — — 0
    B3 Temperatur ≥95 °C 0 0.000 % — — 0
    B4 Druck ≥2,8 bar 0 0.000 % — — 0

    1 means the sensor is active (threshold reached), 0 not active (chapter 8). “Changes” counts the rows in which the value differs from the previous row.

    Values

    All rows of the CSV file, unchanged, 100 rows per page. Search and sorting run on the server; you can jump to a row or a time. “No.” is a running row number and not part of the CSV.

    1,301–1,400 of 6,000 rows Download CSV
    Values — Scenario 2 — Heating with PT1 behaviour
    No. Zeit (s) Füllstand (l) Temperatur (°C) Druck (bar) Heizleistung (W) B1 Füllstand max B2 Füllstand min B3 Temperatur ≥95 °C B4 Druck ≥2,8 bar
    1,301 65.05450.0520.4560.0149344.01000
    1,302 65.1450.0520.460.0149346.71000
    1,303 65.15450.0520.4640.0149349.41000
    1,304 65.2450.0520.4680.0149352.11000
    1,305 65.25450.0520.4720.0149354.81000
    1,306 65.3450.0520.4760.0149357.51000
    1,307 65.35450.0520.480.0149360.21000
    1,308 65.4450.0520.4840.0149362.91000
    1,309 65.45450.0520.4880.0149365.51000
    1,310 65.5450.0520.4920.0149368.11000
    1,311 65.55450.0520.4970.0149370.81000
    1,312 65.6450.0520.5010.0149373.41000
    1,313 65.65450.0520.5050.0149376.01000
    1,314 65.7450.0520.5090.0149378.61000
    1,315 65.75450.0520.5130.0149381.21000
    1,316 65.8450.0520.5170.0149383.81000
    1,317 65.85450.0520.5210.0149386.31000
    1,318 65.9450.0520.5250.0149388.91000
    1,319 65.95450.0520.5290.0149391.51000
    1,320 66.0450.0520.5330.0149394.01000
    1,321 66.05450.0520.5370.0149396.51000
    1,322 66.1450.0520.5410.0149399.01000
    1,323 66.15450.0520.5450.0149401.51000
    1,324 66.2450.0520.5490.0149404.01000
    1,325 66.25450.0520.5530.0149406.51000
    1,326 66.3450.0520.5570.0149409.01000
    1,327 66.35450.0520.5610.0149411.41000
    1,328 66.4450.0520.5650.0149413.91000
    1,329 66.45450.0520.5690.0149416.31000
    1,330 66.5450.0520.5740.0149418.81000
    1,331 66.55450.0520.5780.0149421.21000
    1,332 66.6450.0520.5820.0149423.61000
    1,333 66.65450.0520.5860.0149426.01000
    1,334 66.7450.0520.590.0149428.41000
    1,335 66.75450.0520.5940.0149430.81000
    1,336 66.8450.0520.5980.0149433.21000
    1,337 66.85450.0520.6020.0149435.51000
    1,338 66.9450.0520.6060.0149437.91000
    1,339 66.95450.0520.610.0149440.21000
    1,340 67.0450.0520.6140.0149442.51000
    1,341 67.05450.0520.6180.0149444.91000
    1,342 67.1450.0520.6220.0149447.21000
    1,343 67.15450.0520.6260.0149449.51000
    1,344 67.2450.0520.630.0149451.81000
    1,345 67.25450.0520.6340.0149454.11000
    1,346 67.3450.0520.6380.0149456.31000
    1,347 67.35450.0520.6420.0149458.61000
    1,348 67.4450.0520.6460.0149460.91000
    1,349 67.45450.0520.6510.0149463.11000
    1,350 67.5450.0520.6550.0149465.31000
    1,351 67.55450.0520.6590.0149467.61000
    1,352 67.6450.0520.6630.0149469.81000
    1,353 67.65450.0520.6670.0149472.01000
    1,354 67.7450.0520.6710.0149474.21000
    1,355 67.75450.0520.6750.0149476.41000
    1,356 67.8450.0520.6790.0149478.61000
    1,357 67.85450.0520.6830.0149480.71000
    1,358 67.9450.0520.6870.0149482.91000
    1,359 67.95450.0520.6910.0149485.11000
    1,360 68.0450.0520.6950.0149487.21000
    1,361 68.05450.0520.6990.0149489.31000
    1,362 68.1450.0520.7030.0149491.51000
    1,363 68.15450.0520.7070.0149493.61000
    1,364 68.2450.0520.7110.0149495.71000
    1,365 68.25450.0520.7150.0149497.81000
    1,366 68.3450.0520.7190.0149499.91000
    1,367 68.35450.0520.7230.0149502.01000
    1,368 68.4450.0520.7280.0149504.01000
    1,369 68.45450.0520.7320.0149506.11000
    1,370 68.5450.0520.7360.0149508.21000
    1,371 68.55450.0520.740.0149510.21000
    1,372 68.6450.0520.7440.0149512.31000
    1,373 68.65450.0520.7480.0149514.31000
    1,374 68.7450.0520.7520.0149516.31000
    1,375 68.75450.0520.7560.0149518.31000
    1,376 68.8450.0520.760.0149520.31000
    1,377 68.85450.0520.7640.0149522.31000
    1,378 68.9450.0520.7680.0149524.31000
    1,379 68.95450.0520.7720.0149526.31000
    1,380 69.0450.0520.7760.0149528.31000
    1,381 69.05450.0520.780.0149530.21000
    1,382 69.1450.0520.7840.0149532.21000
    1,383 69.15450.0520.7880.0149534.21000
    1,384 69.2450.0520.7920.0149536.11000
    1,385 69.25450.0520.7960.0149538.01000
    1,386 69.3450.0520.8010.0149540.01000
    1,387 69.35450.0520.8050.0149541.91000
    1,388 69.4450.0520.8090.0149543.81000
    1,389 69.45450.0520.8130.0149545.71000
    1,390 69.5450.0520.8170.0149547.61000
    1,391 69.55450.0520.8210.0149549.51000
    1,392 69.6450.0520.8250.0149551.31000
    1,393 69.65450.0520.8290.0149553.21000
    1,394 69.7450.0520.8330.0149555.11000
    1,395 69.75450.0520.8370.0149556.91000
    1,396 69.8450.0520.8410.0149558.81000
    1,397 69.85450.0520.8450.0149560.61000
    1,398 69.9450.0520.8490.0149562.41000
    1,399 69.95450.0520.8530.0149564.31000
    1,400 70.0450.0520.8570.0149566.11000

    Source and citation

    Data source: Own measurement series, recorded on the model function compute_step (step size Δt = 0.05 s) according to the test log of the bachelor thesis (2026); set-up and evaluation see Chapter 10 — Five test scenarios.

    How to cite

    Kotsch, A. H. (2026): Dataset „Scenario 2 — Heating with PT1 behaviour“ (6,000 rows, time 0.05–300.00 s). Supplement to the bachelor thesis „Digital twins for PLC-coupled laboratory systems“, Duale Hochschule Sachsen — Studienakademie Glauchau. https://thesis.kotsch.tech/daten/szenario-2-heizen (accessed 2026-09-30).

    Limits of this data
    • Classification (chapter 10): The deviations are compatible with the discretisation error of the Euler method.
    • Limit: The expectation uses the same parameters (τ = 12 s, 150 kW); what is tested is the implementation of the equations, not their agreement with a real heating element.
    • The expected values come from hand calculation and the analytical solution with the parameters of the model; agreement shows the correct implementation, not the accuracy compared with a real tank. Each scenario covers a single run with fixed boundary conditions. (Chapter 10)
    • Without measurement data from a real tank, validation is limited to internal consistency. (Chapter 11)

    More datasets