Data series · Chapter 10

Scenario 2 — Heating with PT1 behaviour

Step to 150 kW heating power, time constant 12 s. Reaches 63.3 % at t = τ and 95.1 % at 3τ; mean deviation from the analytical solution 0.040 %.

Scenario
2 Heating
Expectation (criterion)
heating rate 0.0814 K/s; PT1 63.2 % at τ, 95.0 % at 3τ
Measurement
63.3 % at τ, 95.1 % at 3τ; mean deviation 0.040 % of maximum power
Result
passed
Rows
6,000
Time range
0.05–300.00 s
Time step
Δt = 0.05 s
Columns
9

Time series

Each quantity has its own axis and unit in its own panel; all share the time axis. The sensor bits appear as step lines. Clicking the legend shows or hides a quantity.

Time series of the measurement

Building the chart …

Quantities (click to show or hide)

    Controls: ← → move cursor (with ⇧ ten times) · Pos1 Ende to the edge · + − zoom · Bild↑ Bild↓ pan · 0 full series · Esc remove cursor. Drag a region with the mouse to zoom in. Values at the cursor belong to the nearest plotted data point; when zoomed far out the chart shows the minimum and maximum per pixel bucket so that single peaks stay visible. Exact values: zoom in or use the tables.

    Column description

    Name and unit come from the header row of the CSV file; the meaning follows the heated-tank model (chapter 8) and the recording (chapter 10).

    Columns of the series — Scenario 2 — Heating with PT1 behaviour
    No.Column (CSV header) UnitTypeMeaning
    1 Zeit (s) s Time axis Time stamp of the row (model time); one row per calculation step of Δt = 0.05 s.
    2 Füllstand (l) l Process variable Water level in the tank (tank volume 0.5 m³ = 500 l).
    3 Temperatur (°C) °C Process variable Water temperature, calculated from energy and water mass.
    4 Druck (bar) bar Process variable Pressure in the head space (steam and air, partial pressures added).
    5 Heizleistung (W) W Process variable Currently effective heating power (PT1 lag, τ = 12 s, up to 150 kW).
    6 B1 Füllstand max — Sensor bit (0/1) Upper level sensor: 1 from 450 l, otherwise 0.
    7 B2 Füllstand min — Sensor bit (0/1) Lower level sensor: 1 at 50 l or less, otherwise 0.
    8 B3 Temperatur ≥95 °C — Sensor bit (0/1) Temperature sensor: 1 from 95 °C, otherwise 0.
    9 B4 Druck ≥2,8 bar — Sensor bit (0/1) Pressure sensor: 1 from 2.8 bar, otherwise 0.

    Statistics of the series

    All figures are computed from the rows of the CSV file (over the whole series, without smoothing) and describe this single run only. They make no statement about a real tank.

    6,000Rows (calculation steps)
    300.00stime covered
    0.05sTime step Δt
    8recorded quantities
    Statistics per process variable — Scenario 2 — Heating with PT1 behaviour
    QuantityUnit CountMinimum MaximumMean First valueLast value
    Füllstand l 6,000 450.05constant 450.05 450.050 450.05 450.05
    Temperatur °C 6,000 16.131t = 0.05 s 39.568t = 300.00 s 27.4043 16.131 39.568
    Druck bar 6,000 0.0000t = 0.30 s 0.0072t = 0.05 s 0.0000 0.0072 0.0000
    Heizleistung W 6,000 625.0t = 0.05 s 150,000.0t = 178.60 s 144,025.00 625.0 150,000.0

    Below each extreme value is the time of the first row with that value. The mean is the simple mean over all rows (equal time steps).

    Sensor bits: switching times — Scenario 2 — Heating with PT1 behaviour
    Sensor bit Rows with 1 Share first 1 at then 0 again at Changes
    B1 Füllstand max 6,000 100.000 % 0.05 sfirst row — 0
    B2 Füllstand min 0 0.000 % — — 0
    B3 Temperatur ≥95 °C 0 0.000 % — — 0
    B4 Druck ≥2,8 bar 0 0.000 % — — 0

    1 means the sensor is active (threshold reached), 0 not active (chapter 8). “Changes” counts the rows in which the value differs from the previous row.

    Values

    All rows of the CSV file, unchanged, 100 rows per page. Search and sorting run on the server; you can jump to a row or a time. “No.” is a running row number and not part of the CSV.

    1,101–1,200 of 6,000 rows Download CSV
    Values — Scenario 2 — Heating with PT1 behaviour
    No. Zeit (s) Füllstand (l) Temperatur (°C) Druck (bar) Heizleistung (W) B1 Füllstand max B2 Füllstand min B3 Temperatur ≥95 °C B4 Druck ≥2,8 bar
    1,101 55.05450.0519.6480.0148487.81000
    1,102 55.1450.0519.6520.0148494.11000
    1,103 55.15450.0519.6560.0148500.41000
    1,104 55.2450.0519.660.0148506.61000
    1,105 55.25450.0519.6640.0148512.91000
    1,106 55.3450.0519.6680.0148519.11000
    1,107 55.35450.0519.6720.0148525.21000
    1,108 55.4450.0519.6760.0148531.41000
    1,109 55.45450.0519.680.0148537.51000
    1,110 55.5450.0519.6840.0148543.61000
    1,111 55.55450.0519.6880.0148549.71000
    1,112 55.6450.0519.6920.0148555.71000
    1,113 55.65450.0519.6960.0148561.71000
    1,114 55.7450.0519.70.0148567.71000
    1,115 55.75450.0519.7040.0148573.71000
    1,116 55.8450.0519.7080.0148579.61000
    1,117 55.85450.0519.7120.0148585.51000
    1,118 55.9450.0519.7160.0148591.41000
    1,119 55.95450.0519.720.0148597.31000
    1,120 56.0450.0519.7240.0148603.21000
    1,121 56.05450.0519.7290.0148609.01000
    1,122 56.1450.0519.7330.0148614.81000
    1,123 56.15450.0519.7370.0148620.51000
    1,124 56.2450.0519.7410.0148626.31000
    1,125 56.25450.0519.7450.0148632.01000
    1,126 56.3450.0519.7490.0148637.71000
    1,127 56.35450.0519.7530.0148643.41000
    1,128 56.4450.0519.7570.0148649.01000
    1,129 56.45450.0519.7610.0148654.71000
    1,130 56.5450.0519.7650.0148660.31000
    1,131 56.55450.0519.7690.0148665.91000
    1,132 56.6450.0519.7730.0148671.41000
    1,133 56.65450.0519.7770.0148677.01000
    1,134 56.7450.0519.7810.0148682.51000
    1,135 56.75450.0519.7850.0148688.01000
    1,136 56.8450.0519.7890.0148693.41000
    1,137 56.85450.0519.7930.0148698.91000
    1,138 56.9450.0519.7970.0148704.31000
    1,139 56.95450.0519.8010.0148709.71000
    1,140 57.0450.0519.8050.0148715.11000
    1,141 57.05450.0519.8090.0148720.41000
    1,142 57.1450.0519.8130.0148725.71000
    1,143 57.15450.0519.8170.0148731.11000
    1,144 57.2450.0519.8210.0148736.31000
    1,145 57.25450.0519.8250.0148741.61000
    1,146 57.3450.0519.8290.0148746.91000
    1,147 57.35450.0519.8330.0148752.11000
    1,148 57.4450.0519.8370.0148757.31000
    1,149 57.45450.0519.8410.0148762.51000
    1,150 57.5450.0519.8450.0148767.61000
    1,151 57.55450.0519.850.0148772.71000
    1,152 57.6450.0519.8540.0148777.91000
    1,153 57.65450.0519.8580.0148782.91000
    1,154 57.7450.0519.8620.0148788.01000
    1,155 57.75450.0519.8660.0148793.11000
    1,156 57.8450.0519.870.0148798.11000
    1,157 57.85450.0519.8740.0148803.11000
    1,158 57.9450.0519.8780.0148808.11000
    1,159 57.95450.0519.8820.0148813.11000
    1,160 58.0450.0519.8860.0148818.01000
    1,161 58.05450.0519.890.0148822.91000
    1,162 58.1450.0519.8940.0148827.81000
    1,163 58.15450.0519.8980.0148832.71000
    1,164 58.2450.0519.9020.0148837.61000
    1,165 58.25450.0519.9060.0148842.41000
    1,166 58.3450.0519.910.0148847.21000
    1,167 58.35450.0519.9140.0148852.11000
    1,168 58.4450.0519.9180.0148856.81000
    1,169 58.45450.0519.9220.0148861.61000
    1,170 58.5450.0519.9260.0148866.31000
    1,171 58.55450.0519.930.0148871.11000
    1,172 58.6450.0519.9340.0148875.81000
    1,173 58.65450.0519.9380.0148880.51000
    1,174 58.7450.0519.9420.0148885.11000
    1,175 58.75450.0519.9460.0148889.81000
    1,176 58.8450.0519.950.0148894.41000
    1,177 58.85450.0519.9540.0148899.01000
    1,178 58.9450.0519.9580.0148903.61000
    1,179 58.95450.0519.9630.0148908.21000
    1,180 59.0450.0519.9670.0148912.71000
    1,181 59.05450.0519.9710.0148917.21000
    1,182 59.1450.0519.9750.0148921.71000
    1,183 59.15450.0519.9790.0148926.21000
    1,184 59.2450.0519.9830.0148930.71000
    1,185 59.25450.0519.9870.0148935.21000
    1,186 59.3450.0519.9910.0148939.61000
    1,187 59.35450.0519.9950.0148944.01000
    1,188 59.4450.0519.9990.0148948.41000
    1,189 59.45450.0520.0030.0148952.81000
    1,190 59.5450.0520.0070.0148957.21000
    1,191 59.55450.0520.0110.0148961.51000
    1,192 59.6450.0520.0150.0148965.81000
    1,193 59.65450.0520.0190.0148970.11000
    1,194 59.7450.0520.0230.0148974.41000
    1,195 59.75450.0520.0270.0148978.71000
    1,196 59.8450.0520.0310.0148983.01000
    1,197 59.85450.0520.0350.0148987.21000
    1,198 59.9450.0520.0390.0148991.41000
    1,199 59.95450.0520.0430.0148995.61000
    1,200 60.0450.0520.0470.0148999.81000

    Source and citation

    Data source: Own measurement series, recorded on the model function compute_step (step size Δt = 0.05 s) according to the test log of the bachelor thesis (2026); set-up and evaluation see Chapter 10 — Five test scenarios.

    How to cite

    Kotsch, A. H. (2026): Dataset „Scenario 2 — Heating with PT1 behaviour“ (6,000 rows, time 0.05–300.00 s). Supplement to the bachelor thesis „Digital twins for PLC-coupled laboratory systems“, Duale Hochschule Sachsen — Studienakademie Glauchau. https://thesis.kotsch.tech/daten/szenario-2-heizen (accessed 2026-09-30).

    Limits of this data
    • Classification (chapter 10): The deviations are compatible with the discretisation error of the Euler method.
    • Limit: The expectation uses the same parameters (τ = 12 s, 150 kW); what is tested is the implementation of the equations, not their agreement with a real heating element.
    • The expected values come from hand calculation and the analytical solution with the parameters of the model; agreement shows the correct implementation, not the accuracy compared with a real tank. Each scenario covers a single run with fixed boundary conditions. (Chapter 10)
    • Without measurement data from a real tank, validation is limited to internal consistency. (Chapter 11)

    More datasets