Data series · Chapter 10

Scenario 2 — Heating with PT1 behaviour

Step to 150 kW heating power, time constant 12 s. Reaches 63.3 % at t = τ and 95.1 % at 3τ; mean deviation from the analytical solution 0.040 %.

Scenario
2 Heating
Expectation (criterion)
heating rate 0.0814 K/s; PT1 63.2 % at τ, 95.0 % at 3τ
Measurement
63.3 % at τ, 95.1 % at 3τ; mean deviation 0.040 % of maximum power
Result
passed
Rows
6,000
Time range
0.05–300.00 s
Time step
Δt = 0.05 s
Columns
9

Time series

Each quantity has its own axis and unit in its own panel; all share the time axis. The sensor bits appear as step lines. Clicking the legend shows or hides a quantity.

Time series of the measurement

Building the chart …

Quantities (click to show or hide)

    Controls: ← → move cursor (with ⇧ ten times) · Pos1 Ende to the edge · + − zoom · Bild↑ Bild↓ pan · 0 full series · Esc remove cursor. Drag a region with the mouse to zoom in. Values at the cursor belong to the nearest plotted data point; when zoomed far out the chart shows the minimum and maximum per pixel bucket so that single peaks stay visible. Exact values: zoom in or use the tables.

    Column description

    Name and unit come from the header row of the CSV file; the meaning follows the heated-tank model (chapter 8) and the recording (chapter 10).

    Columns of the series — Scenario 2 — Heating with PT1 behaviour
    No.Column (CSV header) UnitTypeMeaning
    1 Zeit (s) s Time axis Time stamp of the row (model time); one row per calculation step of Δt = 0.05 s.
    2 Füllstand (l) l Process variable Water level in the tank (tank volume 0.5 m³ = 500 l).
    3 Temperatur (°C) °C Process variable Water temperature, calculated from energy and water mass.
    4 Druck (bar) bar Process variable Pressure in the head space (steam and air, partial pressures added).
    5 Heizleistung (W) W Process variable Currently effective heating power (PT1 lag, τ = 12 s, up to 150 kW).
    6 B1 Füllstand max — Sensor bit (0/1) Upper level sensor: 1 from 450 l, otherwise 0.
    7 B2 Füllstand min — Sensor bit (0/1) Lower level sensor: 1 at 50 l or less, otherwise 0.
    8 B3 Temperatur ≥95 °C — Sensor bit (0/1) Temperature sensor: 1 from 95 °C, otherwise 0.
    9 B4 Druck ≥2,8 bar — Sensor bit (0/1) Pressure sensor: 1 from 2.8 bar, otherwise 0.

    Statistics of the series

    All figures are computed from the rows of the CSV file (over the whole series, without smoothing) and describe this single run only. They make no statement about a real tank.

    6,000Rows (calculation steps)
    300.00stime covered
    0.05sTime step Δt
    8recorded quantities
    Statistics per process variable — Scenario 2 — Heating with PT1 behaviour
    QuantityUnit CountMinimum MaximumMean First valueLast value
    Füllstand l 6,000 450.05constant 450.05 450.050 450.05 450.05
    Temperatur °C 6,000 16.131t = 0.05 s 39.568t = 300.00 s 27.4043 16.131 39.568
    Druck bar 6,000 0.0000t = 0.30 s 0.0072t = 0.05 s 0.0000 0.0072 0.0000
    Heizleistung W 6,000 625.0t = 0.05 s 150,000.0t = 178.60 s 144,025.00 625.0 150,000.0

    Below each extreme value is the time of the first row with that value. The mean is the simple mean over all rows (equal time steps).

    Sensor bits: switching times — Scenario 2 — Heating with PT1 behaviour
    Sensor bit Rows with 1 Share first 1 at then 0 again at Changes
    B1 Füllstand max 6,000 100.000 % 0.05 sfirst row — 0
    B2 Füllstand min 0 0.000 % — — 0
    B3 Temperatur ≥95 °C 0 0.000 % — — 0
    B4 Druck ≥2,8 bar 0 0.000 % — — 0

    1 means the sensor is active (threshold reached), 0 not active (chapter 8). “Changes” counts the rows in which the value differs from the previous row.

    Values

    All rows of the CSV file, unchanged, 100 rows per page. Search and sorting run on the server; you can jump to a row or a time. “No.” is a running row number and not part of the CSV.

    3,501–3,600 of 6,000 rows Download CSV
    Values — Scenario 2 — Heating with PT1 behaviour
    No. Zeit (s) Füllstand (l) Temperatur (°C) Druck (bar) Heizleistung (W) B1 Füllstand max B2 Füllstand min B3 Temperatur ≥95 °C B4 Druck ≥2,8 bar
    3,501 175.05450.0529.4020.0149999.91000
    3,502 175.1450.0529.4060.0149999.91000
    3,503 175.15450.0529.410.0149999.91000
    3,504 175.2450.0529.4140.0149999.91000
    3,505 175.25450.0529.4180.0149999.91000
    3,506 175.3450.0529.4220.0149999.91000
    3,507 175.35450.0529.4260.0149999.91000
    3,508 175.4450.0529.430.0149999.91000
    3,509 175.45450.0529.4340.0149999.91000
    3,510 175.5450.0529.4380.0149999.91000
    3,511 175.55450.0529.4420.0149999.91000
    3,512 175.6450.0529.4460.0149999.91000
    3,513 175.65450.0529.4510.0149999.91000
    3,514 175.7450.0529.4550.0149999.91000
    3,515 175.75450.0529.4590.0149999.91000
    3,516 175.8450.0529.4630.0149999.91000
    3,517 175.85450.0529.4670.0149999.91000
    3,518 175.9450.0529.4710.0149999.91000
    3,519 175.95450.0529.4750.0149999.91000
    3,520 176.0450.0529.4790.0149999.91000
    3,521 176.05450.0529.4830.0149999.91000
    3,522 176.1450.0529.4870.0149999.91000
    3,523 176.15450.0529.4910.0149999.91000
    3,524 176.2450.0529.4950.0149999.91000
    3,525 176.25450.0529.4990.0149999.91000
    3,526 176.3450.0529.5030.0149999.91000
    3,527 176.35450.0529.5070.0149999.91000
    3,528 176.4450.0529.5120.0149999.91000
    3,529 176.45450.0529.5160.0149999.91000
    3,530 176.5450.0529.520.0149999.91000
    3,531 176.55450.0529.5240.0149999.91000
    3,532 176.6450.0529.5280.0149999.91000
    3,533 176.65450.0529.5320.0149999.91000
    3,534 176.7450.0529.5360.0149999.91000
    3,535 176.75450.0529.540.0149999.91000
    3,536 176.8450.0529.5440.0149999.91000
    3,537 176.85450.0529.5480.0149999.91000
    3,538 176.9450.0529.5520.0149999.91000
    3,539 176.95450.0529.5560.0149999.91000
    3,540 177.0450.0529.560.0149999.91000
    3,541 177.05450.0529.5640.0149999.91000
    3,542 177.1450.0529.5680.0149999.91000
    3,543 177.15450.0529.5730.0149999.91000
    3,544 177.2450.0529.5770.0149999.91000
    3,545 177.25450.0529.5810.0149999.91000
    3,546 177.3450.0529.5850.0149999.91000
    3,547 177.35450.0529.5890.0149999.91000
    3,548 177.4450.0529.5930.0149999.91000
    3,549 177.45450.0529.5970.0149999.91000
    3,550 177.5450.0529.6010.0149999.91000
    3,551 177.55450.0529.6050.0149999.91000
    3,552 177.6450.0529.6090.0149999.91000
    3,553 177.65450.0529.6130.0149999.91000
    3,554 177.7450.0529.6170.0149999.91000
    3,555 177.75450.0529.6210.0149999.91000
    3,556 177.8450.0529.6250.0149999.91000
    3,557 177.85450.0529.630.0149999.91000
    3,558 177.9450.0529.6340.0149999.91000
    3,559 177.95450.0529.6380.0149999.91000
    3,560 178.0450.0529.6420.0149999.91000
    3,561 178.05450.0529.6460.0149999.91000
    3,562 178.1450.0529.650.0149999.91000
    3,563 178.15450.0529.6540.0149999.91000
    3,564 178.2450.0529.6580.0149999.91000
    3,565 178.25450.0529.6620.0149999.91000
    3,566 178.3450.0529.6660.0149999.91000
    3,567 178.35450.0529.670.0149999.91000
    3,568 178.4450.0529.6740.0149999.91000
    3,569 178.45450.0529.6780.0149999.91000
    3,570 178.5450.0529.6820.0149999.91000
    3,571 178.55450.0529.6860.0149999.91000
    3,572 178.6450.0529.6910.0150000.01000
    3,573 178.65450.0529.6950.0150000.01000
    3,574 178.7450.0529.6990.0150000.01000
    3,575 178.75450.0529.7030.0150000.01000
    3,576 178.8450.0529.7070.0150000.01000
    3,577 178.85450.0529.7110.0150000.01000
    3,578 178.9450.0529.7150.0150000.01000
    3,579 178.95450.0529.7190.0150000.01000
    3,580 179.0450.0529.7230.0150000.01000
    3,581 179.05450.0529.7270.0150000.01000
    3,582 179.1450.0529.7310.0150000.01000
    3,583 179.15450.0529.7350.0150000.01000
    3,584 179.2450.0529.7390.0150000.01000
    3,585 179.25450.0529.7430.0150000.01000
    3,586 179.3450.0529.7470.0150000.01000
    3,587 179.35450.0529.7520.0150000.01000
    3,588 179.4450.0529.7560.0150000.01000
    3,589 179.45450.0529.760.0150000.01000
    3,590 179.5450.0529.7640.0150000.01000
    3,591 179.55450.0529.7680.0150000.01000
    3,592 179.6450.0529.7720.0150000.01000
    3,593 179.65450.0529.7760.0150000.01000
    3,594 179.7450.0529.780.0150000.01000
    3,595 179.75450.0529.7840.0150000.01000
    3,596 179.8450.0529.7880.0150000.01000
    3,597 179.85450.0529.7920.0150000.01000
    3,598 179.9450.0529.7960.0150000.01000
    3,599 179.95450.0529.80.0150000.01000
    3,600 180.0450.0529.8040.0150000.01000

    Source and citation

    Data source: Own measurement series, recorded on the model function compute_step (step size Δt = 0.05 s) according to the test log of the bachelor thesis (2026); set-up and evaluation see Chapter 10 — Five test scenarios.

    How to cite

    Kotsch, A. H. (2026): Dataset „Scenario 2 — Heating with PT1 behaviour“ (6,000 rows, time 0.05–300.00 s). Supplement to the bachelor thesis „Digital twins for PLC-coupled laboratory systems“, Duale Hochschule Sachsen — Studienakademie Glauchau. https://thesis.kotsch.tech/daten/szenario-2-heizen (accessed 2026-09-30).

    Limits of this data
    • Classification (chapter 10): The deviations are compatible with the discretisation error of the Euler method.
    • Limit: The expectation uses the same parameters (τ = 12 s, 150 kW); what is tested is the implementation of the equations, not their agreement with a real heating element.
    • The expected values come from hand calculation and the analytical solution with the parameters of the model; agreement shows the correct implementation, not the accuracy compared with a real tank. Each scenario covers a single run with fixed boundary conditions. (Chapter 10)
    • Without measurement data from a real tank, validation is limited to internal consistency. (Chapter 11)

    More datasets